Hero Holds are my absolute favorite tool for decorating. Tape and tacks don’t do it for me anymore.
— Laken Wright, Portland, OR
How To Use Hero Holds
Step 1-Apply Hero Holds!
Attach Hero Holds to your poster or other 2D piece. Magnets go on the front, anchors on the back. Rotate the anchors so the tabs don't extend past the edges of the poster.
Step 2-Remove 'WALL SIDE' Liners
Clean hanging surface with isopropyl rubbing alcohol, wipe gently, and let dry. Remove the tab that reads 'WALL SIDE'
Step 3-Hang Your Stuff!
Position your poster on the wall. Press each anchor firmly for 30 seconds. Didn't get it perfectly straight? That's OK! Remove the magnets, leaving the anchors on the wall. Simply reapply the magnets and poster straight over the anchors.
How To Remove Hero Holds
Step 1- Pull Down Your Poster
Slide magnets off anchors. Do not pull toward you.
Step 2-Press and Pull
Lightly press the anchor against the wall. Grab the tab, and stretch slowly straight along the wall. Do not pull toward you.
Step 3-Keep Pulling Slowly
Continue to stretch at least 6 inches until the strip releases from the wall.